--- title: "How to enable Dynamic Join/leave" slug: "how-to-enable-dynamic-join-leave" updated: 2026-10-16T14:28:26Z published: 2026-10-16T14:28:26Z canonical: "docs.swxtch.io/how-to-enable-dynamic-join-leave" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.swxtch.io/llms.txt > Use this file to discover all available pages before exploring further. # How to enable Dynamic Join/leave > [!NOTE] > **WHAT TO EXPECT** > > In this article, users will learn how to enable and disable dynamic join/leave for groundSwXtches and how to set allow/block rules for multicast joins and leaves. This page is organized into the following functions: - [Enable Dynamic Join/leave](/v2/docs/how-to-enable-dynamic-join-leave#enable-dynamic-joinleave) - [Disable Dynamic Join/leave](/v2/docs/how-to-enable-dynamic-join-leave#disable-dynamic-joinleave) - [Participate in Dynamic Multicast](/v2/docs/how-to-enable-dynamic-join-leave#participate-in-dynamic-multicast) - [Add Allow/Block Rules](/v2/docs/how-to-enable-dynamic-join-leave#add-allowblock-rules) - [Edit an Allow/Block Rule](/v2/docs/how-to-enable-dynamic-join-leave#edit-an-allowblock-rule) - [Allow/Block Rule Priority](/v2/docs/how-to-enable-dynamic-join-leave#allowblock-rule-priority) - [Delete an Allow/Block Rule](/v2/docs/how-to-enable-dynamic-join-leave#delete-an-allowblock-rule) For information on static vs. dynamic, refer to [Using groundSwXtch User Interface - What is Static vs Dynamic?](/v2/docs/dlldld#what-is-static-vs-dynamic). Dynamic is off by default on every node. The allow/block rules only govern automatic joins, not routes you add manually with **Add Source** or **Add Destination**. ## Enable Dynamic Join/leave To enable Dynamic join/leave: 1. Select the **⇄ Dynamic join/leave** button. ![](https://cdn.document360.io/84c5db44-f675-4f33-a980-5d3fc63073ca/Images/Documentation/image(441).png?sv=2026-02-06&spr=https&st=2026-11-19T05%3A53%3A26Z&se=2026-11-19T06%3A53%3A26Z&sr=b&sp=r&sig=CnpPY9HzIm7XMq8gqGj%2B8HYicH4bcKvZme7NImksJjA%3D) 2. The side panel opens to enable Dynamic Multicast IGMP joins and leaves. 3. Select one or more groundSwXtches. Use **Select visible** to pick all groundSwXtches. To clear the selection, select **Clear visible**. ![](https://cdn.document360.io/84c5db44-f675-4f33-a980-5d3fc63073ca/Images/Documentation/image(404).png?sv=2026-02-06&spr=https&st=2026-11-19T05%3A53%3A26Z&se=2026-11-19T06%3A53%3A26Z&sr=b&sp=r&sig=cwIghp05uxmll4WdLvhk05nXx%2FW0%2Bleta%2F3XH4uESR0%3D) 4. Select **Enable all selected** to enable all the selected groundSwXtches. ![](https://cdn.document360.io/84c5db44-f675-4f33-a980-5d3fc63073ca/Images/Documentation/image(405).png?sv=2026-02-06&spr=https&st=2026-11-19T05%3A53%3A26Z&se=2026-11-19T06%3A53%3A26Z&sr=b&sp=r&sig=9RqzQ8TiaoM3Qs0ZzS6lq8dTA3MIixIcHMR36WVWoU0%3D) 1. **Set allow/block rules.** Rules are checked top to bottom and the first match wins. The last rule is a required catch-all that covers everything else. 5. Select **Apply**. The map shows that Dynamic is enabled under each groundSwXtch. ![](https://cdn.document360.io/84c5db44-f675-4f33-a980-5d3fc63073ca/Images/Documentation/image(407).png?sv=2026-02-06&spr=https&st=2026-11-19T05%3A53%3A26Z&se=2026-11-19T06%3A53%3A26Z&sr=b&sp=r&sig=C0Blktvj2jCpmC5%2F5fimrOnP00OkgjKj4NB%2FcDZHH6o%3D) **Confirmation prompts you may see:** - **The first time you turn it on for a node,** you choose the default for streams no rule covers: **Allow all** or **Block all**. You're also offered blocks for UPnP/SSDP, mDNS and LLMNR, which are local-network device-discovery traffic. Those are pre-checked and recommended. - **If another querier is already on the local network,** you're warned that turning Dynamic on will compete with or take over from it. A querier is the device that asks local devices which streams they want. - **If a new block rule would stop streams that are flowing now,** it lists them before cutting them off. ## Disable Dynamic Join/leave To disable Dynamic join/leave: 1. Select the **⇄ Dynamic join/leave** button. The side panel opens to disable Dynamic Multicast IGMP joins and leaves. 2. Select one or more groundSwXtches. Use **Select visible** to pick all groundSwXtches. To clear the selection, select **Clear visible**. ![](https://cdn.document360.io/84c5db44-f675-4f33-a980-5d3fc63073ca/Images/Documentation/image(404).png?sv=2026-02-06&spr=https&st=2026-11-19T05%3A53%3A26Z&se=2026-11-19T06%3A53%3A26Z&sr=b&sp=r&sig=cwIghp05uxmll4WdLvhk05nXx%2FW0%2Bleta%2F3XH4uESR0%3D) 3. Select **Disable all selected**. ![](https://cdn.document360.io/84c5db44-f675-4f33-a980-5d3fc63073ca/Images/Documentation/image(408).png?sv=2026-02-06&spr=https&st=2026-11-19T05%3A53%3A26Z&se=2026-11-19T06%3A53%3A26Z&sr=b&sp=r&sig=JfdZ8Ml8PbHtQP1ASpvEoq3zdDJ%2F0d4tEaELOBLwMtA%3D) 4. Select **Apply**. ## Participate in Dynamic Multicast This section only applies when a single groundSwXtch is selected. 1. Select or deselect groundSwXtches until only one is selected, as shown below: ![](https://cdn.document360.io/84c5db44-f675-4f33-a980-5d3fc63073ca/Images/Documentation/image(439).png?sv=2026-02-06&spr=https&st=2026-11-19T05%3A53%3A26Z&se=2026-11-19T06%3A53%3A26Z&sr=b&sp=r&sig=PvSTmHBQ6C7I0I%2FzUbrouvRQKoyOhwasrc0mqeHzr24%3D) 2. Turn on the **Participate in Dynamic multicast** switch (or turn it off to disable). ![](https://cdn.document360.io/84c5db44-f675-4f33-a980-5d3fc63073ca/Images/Documentation/image(445).png?sv=2026-02-06&spr=https&st=2026-11-19T05%3A53%3A26Z&se=2026-11-19T06%3A53%3A26Z&sr=b&sp=r&sig=zXTsnjONOKOACBInGvj89pgW%2ByzpVT1%2B0itTkVTr7WA%3D) 3. Select **Apply**. ### Add Allow/Block Rules Individual groundSwXtches can have more rules to allow or block multicast traffic. Some rules are set automatically, as shown below. ![](https://cdn.document360.io/84c5db44-f675-4f33-a980-5d3fc63073ca/Images/Documentation/image(409).png?sv=2026-02-06&spr=https&st=2026-11-19T05%3A53%3A26Z&se=2026-11-19T06%3A53%3A26Z&sr=b&sp=r&sig=XbE1E2nEPe%2Fnvq4Pnqw%2BvfGtwgYN3%2BmrgxRtWNfaCF0%3D) To add more allow/block rules: 1. Select the **Add Rule** icon. The side panel expands to enter the rule. ![](https://cdn.document360.io/84c5db44-f675-4f33-a980-5d3fc63073ca/Images/Documentation/image(410).png?sv=2026-02-06&spr=https&st=2026-11-19T05%3A53%3A26Z&se=2026-11-19T06%3A53%3A26Z&sr=b&sp=r&sig=2RvQMlOZBRSRrsFF3l9%2FCsPjTaTWEQxjwki9G1HxqZE%3D) 2. Select the **Known Use** drop-down to pick the type. Choosing one of the common discovery protocols (UPnP/SSDP, mDNS or LLMNR) fills in its address for you. **Custom IP / CIDR / range** lets you enter your own. The remaining steps are for Custom IP / CIDR / range. ![](https://cdn.document360.io/84c5db44-f675-4f33-a980-5d3fc63073ca/Images/Documentation/image(412).png?sv=2026-02-06&spr=https&st=2026-11-19T05%3A53%3A26Z&se=2026-11-19T06%3A53%3A26Z&sr=b&sp=r&sig=JSbRbWnA1YMFwT6NAAtEoBzB8Wlq2ion340385AFzMQ%3D) 3. Select the action: **Allow** or **Block**. Allow lets this node join matching streams when devices ask for them. Block stops it. 4. Select the **Match Form**: **Single IP** for one group, **CIDR** for a block of groups (e.g. `239.1.1.0/24`), or IP range for a start and end address. ![](https://cdn.document360.io/84c5db44-f675-4f33-a980-5d3fc63073ca/Images/Documentation/image(413).png?sv=2026-02-06&spr=https&st=2026-11-19T05%3A53%3A26Z&se=2026-11-19T06%3A53%3A26Z&sr=b&sp=r&sig=8wwowHiRC2f%2BfEUReDN%2Fw%2FMbgfMPjvHJ4aF7GJEVU4E%3D) 5. Enter the **Address/Range** in the format of the selected **Match Form** (**Single IP**, **CIDR**, **IP range**). The formats are below: ![](https://cdn.document360.io/84c5db44-f675-4f33-a980-5d3fc63073ca/Images/Documentation/image(421).png?sv=2026-02-06&spr=https&st=2026-11-19T05%3A53%3A26Z&se=2026-11-19T06%3A53%3A26Z&sr=b&sp=r&sig=4xXg7djvysTj6mS2rRV0AV%2FbuiwWPV0AmuKjbK2Enjg%3D) A range has to be written with a **hyphen** between two full addresses, for example `239.0.0.1-239.0.0.99`. A slash is only for CIDR notation. **Accepted formats:** | Match form | Format | Example | | --- | --- | --- | | Single IP | one address | `239.0.0.1` | | IP range | full start address, hyphen, full end address | `239.0.0.1-239.0.0.99` | | CIDR | address, slash, number from 0 to 32 | `239.0.0.0/24` (covers 239.0.0.0–239.0.0.255) | Every address must be a multicast address (224.x.x.x to 239.x.x.x), and the start of a range can't be higher than the end. Spaces around the hyphen are fine. 1. Enter a label. The label is a display name that fills itself in (for example, "allow · 239.0.0.1") until you type your own; it doesn't affect which streams match. 2. Select **Add rule**. 3. Select **Apply**. The rule is not added until you select **Apply** at the bottom of the form. ![](https://cdn.document360.io/84c5db44-f675-4f33-a980-5d3fc63073ca/Images/Documentation/image(415).png?sv=2026-02-06&spr=https&st=2026-11-19T05%3A53%3A26Z&se=2026-11-19T06%3A53%3A26Z&sr=b&sp=r&sig=fGkizSSAZXfzlz5Yd24p8GuXyQI5g3fdEawkaOBWOoo%3D) ### Edit an Allow/Block Rule A rule can be edited after it is added. To edit an allow/block rule: 1. Select the **Edit Rule** icon. ![](https://cdn.document360.io/84c5db44-f675-4f33-a980-5d3fc63073ca/Images/Documentation/image(417).png?sv=2026-02-06&spr=https&st=2026-11-19T05%3A53%3A26Z&se=2026-11-19T06%3A53%3A26Z&sr=b&sp=r&sig=6iGO3oFplznOrJ54Q04hkb0dKVWDa59LDFyFMBbrnnc%3D) 2. Change what is needed. 3. Select **Save changes**. ![](https://cdn.document360.io/84c5db44-f675-4f33-a980-5d3fc63073ca/Images/Documentation/image(418).png?sv=2026-02-06&spr=https&st=2026-11-19T05%3A53%3A26Z&se=2026-11-19T06%3A53%3A26Z&sr=b&sp=r&sig=aNYfKrWL9AbPQOnfNgFI1qYgbCrP8IMuKneyvPoDJsQ%3D) ### Allow/Block Rule Priority Change the order of the rules to set their priority. ![](https://cdn.document360.io/84c5db44-f675-4f33-a980-5d3fc63073ca/Images/Documentation/image(419).png?sv=2026-02-06&spr=https&st=2026-11-19T05%3A53%3A26Z&se=2026-11-19T06%3A53%3A26Z&sr=b&sp=r&sig=Dhv9b3AEYRrcdZ0NpyeKupVFcmab0ca8R4925kLEbeQ%3D) **How the arrows behave:** - **↑** moves a rule one place up, giving it higher priority. It's greyed out on the top rule. - **↓** moves a rule one place down. It's greyed out on the last rule above the catch-all, because nothing can go below the catch-all. - **The catch-all** ("Any multicast group", with the 🔒) has no arrows. It's always last and only handles requests that no other rule matched. - **The ⠿ handle** on the left does the same thing as the arrows, by dragging. - **Apply:** a reorder isn't saved until you select **Apply**. Order matters when rules overlap. Say you add: 1. **Allow** `239.1.1.0/24` (all groups from 239.1.1.0 to 239.1.1.255) 2. **Block** `239.1.1.5` (one group inside that range) With Allow on top, a request for 239.1.1.5 matches the Allow rule first and gets through, so the Block rule never takes effect. Moving the Block rule **up** above the Allow rule blocks 239.1.1.5 while still allowing the rest of the range. The rule of thumb is to put specific rules (single addresses and exceptions) above broad ones (CIDR blocks and ranges). ### Delete an Allow/Block Rule A rule can be deleted if it no longer applies. To delete an allow/block rule: 1. Select the **Delete Rule** icon. ![](https://cdn.document360.io/84c5db44-f675-4f33-a980-5d3fc63073ca/Images/Documentation/image(420).png?sv=2026-02-06&spr=https&st=2026-11-19T05%3A53%3A26Z&se=2026-11-19T06%3A53%3A26Z&sr=b&sp=r&sig=%2BHmtpqGl4zJoIGIXOOzkLfnbc3CXTlnOp8bBIRyVXYE%3D) 2. Select **Apply**. The rule isn't deleted until you select **Apply** at the bottom of the form. If a matching stream is running, a warning is shown; otherwise the rule is deleted without a warning. A software-based network switch that adds multicast to your physical networks as a softwared defined overlay. Link your facilities into a reliable multicast fabric.